Promo offer Waveshare 3.5inch HDMI LCD Resistive Touch Screen 480×320 High Resolution HDMI interface IPS Screen Designed for Raspberry Pi 3
Get here: Waveshare 3.5inch HDMI LCD Resistive Touch Screen 480×320 High Resolution HDMI interface IPS Screen Designed for Raspberry Pi 3 from digitaldream.me. Check Discount. Get also the best products from this store.
Welcomed to order these Raspberry Pi touch screens !
Waveshare 3.5inch HDMI LCD, 480×320, IPS
- 480×320, 3.5inch Resistive Touch Screen LCD, HDMI interface, IPS Screen, Designed for Raspberry Pi
- 480×320 hardware resolution, software configurable up to 1920×1080
- Resistive touch control
- IPS technology, high quality and perfect displaying from very wide viewing angle
- Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
- Drivers provided (works with your own Raspbian/Ubuntu directly)
- Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
- HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
- Multi-languages OSD menu, for power management, brightness adjustment, contrast adjustment, etc.
- Supports 100-level backlight adjustment
- Supports HDMI audio outpu
|1, 17||3.3V||Power positive (3.3V power input)|
|2, 4||5V||Power positive (5V power input)|
|3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24||NC||NC|
|6, 9, 14, 20, 25||GND||Ground|
|19||TP_SI||SPI data input of Touch Panel|
|21||TP_SO||SPI data output of Touch Panel|
|22||TP_IRQ||Touch Panel interrupt, low level while the Touch Panel detects touching|
|23||TP_SCK||SPI clock of Touch Panel|
|26||TP_CS||Touch Panel chip selection, low active|
- Why the LCD doesn’t work with my Raspbian?
- To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.
- Why the LCD still doesn’t work with the Waveshare provided image?
- Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
- Which power supply should I use?
- It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC’s USB port might have not enough power to support the Pi and LCD.
For more info, please check the wiki page.
|Part Number||Resolution||LCD Interface||Touch Panel Interface||For use with||Dimension (mm)||Touch Panel Type||How you feel||Feature|
|2.8inch RPi LCD (A)||320×240||I/O||I/O||Pi||As the Pi 3B||Resistive||★★||Low cost|
|3.2inch RPi LCD (B)||320×240||I/O||I/O||Pi||As the Pi 3B||Resistive||★★||Low cost|
|3.5inch RPi LCD (A)||480×320||I/O||I/O||Pi||As the Pi 3B||Resistive||★★★||Cost effective|
|3.5inch RPi LCD (B)||480×320||I/O||I/O||Pi||As the Pi 3B||Resistive||★★★||IPS screen|
|3.5inch HDMI LCD||480×320||HDMI||I/O||Pi||As the Pi 3B||Resistive||★★★★☆||IPS screen|
|4inch RPi LCD (A)||480×320||I/O||I/O||Pi||94 × 61||Resistive||★★★☆||IPS screen|
|4inch HDMI LCD||800×480||HDMI||I/O||Pi||99 × 58||Resistive||★★★★☆||IPS screen|
|4.3inch HDMI LCD||480×272||HDMI||I/O||Pi||106 × 68||Resistive||★★★★||Cost effective|
|5inch HDMI LCD||800×480||HDMI||I/O||Pi||121 x 78||Resistive||★★★★||Low cost|
|5inch HDMI LCD (B)||800×480||HDMI||USB||Not only Pi||121 x 76||Resistive||★★★★||Supports various systems|
|7inch HDMI LCD||1024×600||HDMI||I/O||Pi||165 × 107||Resistive||★★★★☆||Cost effective|
|7inch HDMI LCD (B)||800×480||HDMI||USB||Not only Pi||165 x 107||Capacitive||★★★★☆||Supports various systems|
|7inch HDMI LCD (C)||1024×600||HDMI||USB||Not only Pi||165 x 107||Capacitive||★★★★★||IPS screen, Supports various systems|
|10.1inch HDMI LCD||1024×600||HDMI||I/O||Pi||235 × 144||Resistive||★★★★☆||Cost effective|
|10.1inch HDMI LCD (H)||1024×600||HDMI||USB||Not only Pi||257 x 162||Capacitive||★★★★☆||Supports various systems|
|10.1inch HDMI LCD (B)||1280×800||HDMI||USB||Not only Pi||274 × 187||Capacitive||★★★★★||IPS screen, Supports various systems|
Pi 3B = Raspberry Pi 3 Model B
If the LCD is intended to play videos, please choose the one with HDMI display interface for better experience.
Have a look :
- 3.5inch HDMI LCD x1
- HDMI connector x1
- Touch pen x1
- Aluminium heat sink x1
- DVD x1
Terms & Conditions
* We accept Escrow as the payment method. Currently, you can pay by Visa, MasterCard and bank transfer. For more information about making payment, please go to ‘Escrow FAQ’ to get more details. https://i0.wp.com/escrow.aliexpress.com/escrow-faq/payment/what-payment-methods-can-i-use.html
* We ship items to Worldwide!
* Please make sure that your shipping address is 100% correct.
* All items will be shipped within 48 working hours on receipt of cleared payment.
* We’ll add a tracking number after sending the item so that you can track your parcel.
3. Returns Policy:
* We are happy to return any unused item in its original packaging within 14 days of delivery.
* Buyers are responsible for the round(two-way) shipping cost.
* We’ll leave POSITIVE FEEDBACK on receipt of cleared payment.
* If you’re satisfied with the item and our service, please leave POSITIVE FEEDBACK, it’s important to us.
* Once any problems occured, please contact us first. We’ll try our best to work things out.
Please feel free to contact us for any questions, on trademanager, or send message to me. If you need to adjust the total price, pls contact us in advance. It’s our pleasure to serve you! We appreciate your business!!
#digitalinovation Waveshare 3.5inch HDMI LCD Resistive Touch Screen 480×320 High Resolution HDMI interface IPS Screen Designed for Raspberry Pi 3
Sale Raspberry pi 3 / 5 inch Display Touch Screen Dedicated Shell Black and White
US $15.99 / piece
Buy 3.5 Inch TFT LCD Moudle For Raspberry Pi 2 Model B & RPI B+ raspberry pi 3
Sale 7inch Raspberry Pi LCD TFT Display 1024*600 50pin Monitor Screen Module+Drive Board HDMI VGA+Remote Control for Raspberry Pi 3 2
Wholesale prices Raspberry Pi 5inch 3 generation of B type LCD screen touch the HDMI interface raspberries pie 5inch display screen
US $67.90 / piece
Best Buy X820 2.5 inch SATA HDD/SSD Storage Expansion Board Kit with DC 5V 4A Power Adapter EU/US Plug for Raspberry Pi 3 Model B/ 2B /B+
Cheaper 8 inch AT080TN52 LCD Driver Board with Touch Screen HDMI/VGA/2AV Driver board +touch panel kit for Raspberry Pi
US $57.00 / piece
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.